? coilcraft, inc. 2007 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo6610 series document 333-1 document 333-1 revised 04/24/07 this series has been specially de- signed for applications requiring a very small footprint and the lowest pos- sible height: notebook computers, pdas, pc cards, mobile phones and other handheld products. despite their low profile (1 mm) these inductors offer excellent current han- dling ? up to 2.1 a. they are available in 16 inductance values from 1.2 to 330 h. coilcraft designer?s kit c367 contains samples of all values shown. to order, contact coilcraft or purchase on-line at http://order.coilcraft.com . l 2 dcr srf 20% max typ i sat 3 i rms 4 part number 1 (h) (ohms) (mhz) (a) (a) lpo6610-122ml_ 1.2 0.08 190 2.1 1.7 lpo6610-152ml_ 1.5 0.10 140 1.9 1.5 lpo6610-222ml_ 2.2 0.12 115 1.6 1.4 lpo6610-332ml_ 3.3 0.16 90 1.3 1.2 lpo6610-472ml_ 4.7 0.20 88 1.1 1.1 lpo6610-682ml_ 6.8 0.32 66 0.90 0.85 lpo6610-103ml_ 10 0.41 55 0.80 0.75 lpo6610-153ml_ 15 0.55 42 0.65 0.60 lpo6610-223ml_ 22 0.85 38 0.50 0.52 lpo6610-333ml_ 33 1.3 29 0.40 0.42 lpo6610-473ml_ 47 1.8 22 0.35 0.36 lpo6610-683ml_ 68 2.5 18 0.30 0.30 lpo6610-104ml_ 100 3.5 14 0.25 0.26 lpo6610-154ml_ 150 5.0 12 0.18 0.21 lpo6610-224ml_ 220 7.0 10 0.16 0.18 lpo6610-334ml_ 330 15.0 8 0.13 0.13 1. when ordering, please specify termination and packaging codes: lpo6610-334m lc termination: l = rohs compliant silver-palladium-platinum -glass frit. special order: t = rohs tin-silver-copper (95.5/4/0.5) or s = non-rohs tin-lead (63/37). packaging: c =7 machine-ready reel. eia-481 embossed plastic tape (1000 parts per full reel). b = less than full reel. in tape, but not machine ready. to have a leader and trailer added ($25 charge), use code letter c instead. 2. inductance tested at 100 khz, 0.1 vrms, 0 adc. 3. dc current at which the inductance drops 10% (typ) from its value without current. 4. current that causes a 40c temperature rise from 25c ambient. 5. ambient temperature range: ? 40c to +85c with i rms current +85c to +125c with derated current 6. storage temperature range: component: ? 55c to +85c packaging: ? 55c to +80c 7. resistance to soldering heat: three reflows at >217c for 90 seconds (+260c 5c for 20 ? 40 seconds), allowing parts to cool to room temperature between. 8. electrical specifications at 25c. see qualification standards section for environmental and test data. refer to doc 362 ?soldering surface mount components? before soldering.
? coilcraft, inc. 2007 specifications subject to change without notice. please check our website for latest information. smt power inductors - lpo6610 series typical l vs frequency typical l vs current document 333-2 document 333-2 revised 04/24/07 0.1 1 10 100 1000 0.01 0.1 110 current (a) inductance (h) 10 h 100 h 1.2 h 0.1 1 10 100 1000 0.01 0.1 110 frequency (mhz) inductance (h) 10 h 100 h 1.2 h 0.216 5,50 max 0.040 0.004 1,00 0,10 0.260 6,60 max 0.029 0,750 dash number internal code 0.192 4,90 0.134 3,40 0.100 2,54 0.185 4,70 0.100 2,50 0.150 3,80 0.270 6,90 recommended land pattern xxx x terminations: silver-palladium-platinum-glass frit weight: 91.0 ? 95.0 mg tape and reel: 1000/7 reel 12 mm tape width for packaging data see tape and reel specifications section. irms derating -40 -20 0 20 40 60 80 100 140 120 ambient temperature (c) 120 110 100 90 80 70 60 50 40 30 20 10 0 25c percent of rated rms i
|
